A guide to: Exterior wall rendering

Exterior Rendering refers to the act of applying an external wall covering composed mainly of cement and sand and a lime based or synthetic resin based colour resin. This is done with the goal of protecting the building’s bricks from the elements.

Ceresit CT74 silicone render is ideal for this, as it is ideal for making thin layer renders on concrete substrates, traditional renders, gypsum substrates and chipboards, gypsum cardboards. You can also use the Ceresit Ceretherm reliable and popular thermal insulation system to achieve this. Ceretherm is an economic solution that offers proper thermal insulation properties and regular resistance to weather changing conditions. In addition to this, it is an economic, ETA Ceresit Ceretherm Popular certified solution which is resistant to fungi and algae.

Either Ceresit ZS/CT 81 or Ceresit ZU/CT 82 can be used for the fixing stage and EN 13163 classified EPS boards with a 42 cm thickness for the insulation material. The reinforced layer can be built using an adhesive and reinforcing mesh such as Ceresit ZU/CT 82, in conjunction with a glass fibre mesh like Ceresit CT 325.

Ceresit CT 16 can be used as the priming paint, with CT 60, CT 63, CT 64 being great choices for the plastering stage. Finally, Ceresit CT42 is a perfect choice for the final layer of paint on the walls.

Buy yours with us today at www.insulationbee.co.uk or speak to one of our friendly staff on 02038839057

Comments

Buy 38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard

38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard A high performing insulating plasterboard . Designed for use in British Gypsum wall lining and partition systems where both moisture resistance and greater thermal performance are required. 12.5mm British Gypsum Gyproc Moisture Resistant Board factory bonded to rigid Polyisocyanurate foam with zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5. Both faces of the Polyisocyanurate insulant are lined with a multi-layer vapour control barrier, with a Class 0 fire performance (Euroclass B-S 1, d0). CLICK HERE TO BUY YOURS TODAY 38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard Product Details Thickness: 38mm All Thickness: 38mm,53mm,63mm,78mm,93mm Length: 2400mm Width: 1200mm Weight: 10.10kg/m2 Coverage: 2.88m2 Thermal Conductivity: Gyproc WallBoard 0.19W/mK Thermal Conductivity: Polyisocyanurate foam 0.022W/mK Fire rating: B class0 Thermal resistance:

Buy Acoustic Roll

Acoustic Roll Acoustic Roll is a Glass Mineral Wool roll, designed for use in internal wall and floor applications, to offer sound absorption and noise reduction properties. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Proven test results with all major brands of plasterboard to provide assured compliance with sound related building regulations. Manufactured density in excess of 10kg/m³ meeting the requirements outlined within relevant sound related building regulations. Rolls are designed to fit between studs to close joints, reducing the potential for unwanted gaps and ensuring high levels of sound insulation. Buy yours with us today at www.insulationbee.co.uk or speak to one of our friendly staff on 02038839057

Buy Knauf Insulation Loft Roll 44

Knauf Insulation Loft Roll 44 Knauf Insulation Loft Roll 44 is a Glass Mineral Wool roll, designed for use in cold lofts where pitched roofs are insulated at ceiling level, that offers good thermal performance in the range. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Knauf Insulation Loft Roll 44 is available in the following formats: Combi-cut rolls Ready-cut rolls Uncut rolls Short length, combi-cut rolls Benefits: Compression packed and lightweight for easy handling and moving around a site. Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency. Ready-cut products are supplied cut to size to maximise on-site efficiency. Uncut products provide the flexibility to be cut to size to fit between joists or can be left in f

Insulationbee ltd Shop! Buy your insulation materials online

Search This Blog