Skip to main content


Showing posts with the label eco-therm

Buy Eco-Therm floor insulation

Eco-Therm floor insulation Eco-Therm floor insulation is thin, rigid floor insulation boards suitable for solid, concrete, timber and suspended floors. Whilst heat rises, it is also very important to insulate the floors as part of the ‘total building envelope’. EcoTherm Insulation has excellent compressive strength which is advantageous when insulating a floor.  EcoTherm's insulation boards are suitable for the following floor applications: Ground bearing concrete floors Suspended hollow pot floors Suspended timber floors Foundations and roof perimeter Remedial overlay floors Eco-Versal is suitable for use in new builds or upgrading the thermal performance of existing floors. Applications: Solid concrete floors (above and below slab); Block and beam floors; Suspended timber floors and; Underfloor heating systems For underfloor heating, Eco-UFH is the ideal solution with a tough membrane facing (no need for polythene overlay before screeing), gridlines for pipe guidance and superb

Buy Eco-Therm Wall insulation boards

Eco-Therm Wall insulation boards Eco-Therm Wall insulation boards are an ideal solution to insulating cavity walls, internal walls and timber frame walls. Eco-Cavity wall insulation boards are ideal for masonry walls. They achieve high levels of thermal performance for thinner constructions whilst maintaining a clear residual air gap; effective protection against driving rain, particularly in coastal and exposed locations. The boards are conveniently sized to co-ordinate with brick and block dimensions and to allow the insertion of wall ties at the appropriate spacing. Eco-Cavity Full Fill allows users to optimise the full cavity with high performing thermal insulation, meaning U-values and Building Regulations can be met without altering standard construction designs. Eco-Cavity Full Fill prevents the need to increase cavity space and overall wall width to accommodate larger thicknesses of traditional insulation materials. The board's tongue and groove edges ensure a continuous l

Buy Eco-Therm Flat roof insulation

Eco-Therm Flat roof insulation Eco-Therm Flat roof insulation tackles heat loss where it matters most  Up to 25% of a building's heat loss is through the roof. By using insulation with excellent thermal performance this will greatly improve the energy efficiency of the building, and in turn make meeting Building Regulations/Standards easy.  EcoTherm in flat roofs:  Ideal for both new build and existing roofs (replacing or refurb) Lightweight boards will not weigh down the structure Compatibility with variety of waterproofing systems Easy to cut and transport on site due to the boards ridigity and light weight Excellent thermal performance means thinner boards that will not add to overall building height Eco-Torch can be used for new build or refurbished roofs, or for upgrading the thermal performance of existing roofs. Application: Torch on felt; Bituminous single ply membranes; Mastic asphalt; Roll and pour felt and; fully adhered single ply systems Tough, structural, pre insulat

Buy Eco-Therm Pitched Roof Insulation

Eco-Therm Pitched Roof Insulation Eco-Therm Pitched Roof Insulation is a thin PIR insulation board that is ideal insulation for not only pitched roofs but loft floors, ceilings and dormer cheeks. EcoTherm's rigid insulation boards will easily and quickly achieve required thermal standards in pitched roofs without the need to alter the thickness of the construction or your method.  Equally, the risk of deterioration to the structure is reduced as condensation is minimised. Meet Building Regulations/Standards with ease using high thermally performing EcoTherm whilst taking a fabric first approach to insulating a house. PIR insulation requires approximately half the thickness of traditional forms of insulation to meet the same level of thermal performance - don't adjust your standard construction design, optimize the space you save.  Achieve the same thermal performance and maximise your space.  EcoTherm in pitched roofs: Minimise potential condensation problems Ideal for room in

Buy Eco-Therm Eco-UFH

Eco-Therm Eco-UFH Eco-Therm Eco-UFH Fibre free rigid polyisocyanurate (PIR) insulation core faced with tough, gridded woven aluminium facings on both sides is used for insulating screeded under floor heating systems and to provide a fast and secure method of installing UFH water pipes Please note: Lead time is two weeks from receipt of order and minimum order quantities are as follows: 60mm – minimum run 3000m2 75mm -  minimum run 2500m2  85mm – minimum run 2500m2 105mm – minimum run 2000m2 Thermal conductivity: 0.022 W/mK Dimensions: 1200 x 2400 mm (2.88m2) Thickness: 25 - 100 mm Facing: Gridded woven aluminium composite foil Core: Fibre free rigid polyisocyanurate (PIR) insulant manufactured with a blowing agent that is CFC/HCFC free and has zero Ozone Depletion Potential (ODP) with a low Global Warming Potential (GWP) Compressive strength: 150 kPa when tested at 10% compression to BS EN 826: 2013 Please speak to one of our friendly staff on 02038839057 Buy yours with us today at