Insulationbee ltd Shop! Buy your insulation materials online

ATLAS CERPLAST  ATLAS CERPLAST – priming mass for renders primes substrates for ATLAS thin-coat renders – mineral, acrylic and mosaic. Increases adhesion – strongly adheres to the substrate and the applied renders. Limits the absorbability of the substrate – prevents excessive transfer of water from the freshly applied renders into the substrate. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTERS ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTERS is a colourless solution of a silicone dispersion in an organic solvent. Hydrophobic action – reacts with air components and water present in the pores of the protected material, thus reduces its absorptivity and protects construction elements against excessive soaking with water. Does not limit water vapour permeability – does not cause condensation of dampness in a partition, damp walls can get dry after the product application. Deeply penetrating – based on a formula of organic solvents, penetrates deep into the structure of a material. High resistance to alkali, acid rains, UV radiation and aggressive urban environment. Colourless – emphasises substrate colour and does not affect its appearance. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS MYKOS ATLAS MYKOS is for destroying organic deposits such as fungi, molds, lichen, algae and mosses, on facades, terraces, in bathrooms. The preparation can be used on virtually all construction surfaces, especially on mineral substrates, such as concrete, cement and cement plasters. limestone, cement screeds, joints. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS DELFIN ATLAS DELFIN contains a selected mixture of inorganic and organic acids effective, highly concentrated – removes stubborn dirt, both fresh and old, hardened mineral mortar residues the possibility of dilution depending on the type and degree of soiling Recommended for protection against typical usage dirt – from oils, fats, coffee, tea and water. Protects porous surfaces – which may be subject to structural dirt. Makes cleaning easier. Types of protected substrates – cement joints, highly absorbent tiles (unglazed ceramic, stone and cement). Main properties gives the tiles a delicate shine colorless resistant to cleaning agents protects against oil, coffee, tea and water stains Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS CONCENTRATE FOR STRONG CEMENT DIRTS ATLAS CONCENTRATE FOR STRONG CEMENT DIRTS contains a selected mixture of inorganic and organic acids. Effective, highly concentrated – removes stubborn dirt, both fresh and old, hardened mineral mortar residues the possibility of dilution depending on the type and degree of soiling removes old deposits, salting, rust stains for stoneware, tiles, clinker, concrete cleans tools and devices from heavy dirt after cement mortars Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS CLEAN TILES  ATLAS CLEAN TILES contains a selected mixture of inorganic and organic acids effective, highly concentrated – removes stubborn dirt, both fresh and old, hardened mineral mortar residues the possibility of dilution depending on the type and degree of soiling Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS CLEAN GROUTS  ATLAS CLEAN GROUTS contains non-ionic and anionic surfactants, organic acids. Efficiently cleans grouts from general household dirt. Does not cause grouts cracking and softening. Quick and easy in use. For daily use. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS AGENT FOR REMOVAL OF SILICONE  ATLAS AGENT FOR REMOVAL OF SILICONE is a thick paste based on solvents. Does not drip or flow from vertical surfaces. Does not cause damage to acrylic bathtubs and shower-baths. Does not cause damage to adjacent surfaces. Set includes a spatula for precise agent application. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS AGENT FOR REMOVAL OF CEMENT DEPOSITS AND STAINS ATLAS AGENT FOR REMOVAL OF CEMENT DEPOSITS AND STAINS is a solvent solution of mixture of inorganic and organic acids. Efficient and quick in action. Does not damage acrylic casings of showers and bathtubs, seals and silicones. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS GEOFLEX EXPRESS ATLAS GEOFLEX EXPRESS contains the unique siliceous gel technology. The siliceous gel offers exceptional ability of water retention which ensures full cement hydration, regardless the cladding type in use. Use of the siliceous gel technology allows for: • fixing cladding of any type, both porous and low suction, • optimum adaptation of the adhesive consistency to individual contractor’s preferences and actual needs resulting from particular use, by dosing water within a range much wider than in case of traditional adhesives, • full adhesive spread underneath the tiles, which improves adhesion, particularly in case of outdoor use, • safe cladding installation on substrates exposed to direct sunshine (if the temperature does not exceed 35°C), both during tiling and the adhesive setting. Rapid setting – use of rapid setting cement in the adhesive formula allows for rapid increase of adhesion and strength, especially during the initial setting (first 2-3 hours after

Atlas GIPSAR UNI Atlas GIPSAR UNI is recommended for gypsum finishing coats on walls and ceilings . It fills small cavities in walls and ceilings – can be used for surface repair before the execution of the finishing coat. • reinforced with polymers • optimum hardness • ideal spreading upon substrate • effective paint coverage • snow-white colour Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ATLAS GTA ATLAS GTA is a mass manufactured on the basis of resin binders, mineral fillers and modifying additives. Perfectly white, perfectly smooth – thoroughly selected snow-white mineral fillers of optimum aggregate size allow to form a perfectly smooth surface without further corrections. Optimum consistency for application and top coat shaping – specially adjusted rheological parameters allow effortless application with a trowel, a roller or a plastering unit. Convenient top coat shaping produces a smooth surface since the first move of a trowel. Quick application with a roller – an ideal consistency and prolonged open time enable convenient and quick application with a roller. Top finish can be distributed uniformly without splashing. Durable and elastic – elastic polymer bonds ensure high bonding and resistance to cracking of the coated surfaces. For all types of gypsum filling: PSG1(Q1), PSG2(Q2), PSG3(Q3), PSG4(Q4). For filling joints of plasterboards with the use of reinforc

ATLAS GEOFLEX EXPRESS ATLAS GEOFLEX EXPRESS contains the unique siliceous gel technology. The siliceous gel offers exceptional ability of water retention which ensures full cement hydration, regardless the cladding type in use. Use of the siliceous gel technology allows for: • fixing cladding of any type, both porous and low suction, • optimum adaptation of the adhesive consistency to individual contractor’s preferences and actual needs resulting from particular use, by dosing water within a range much wider than in case of traditional adhesives, • full adhesive spread underneath the tiles, which improves adhesion, particularly in case of outdoor use, • safe cladding installation on substrates exposed to direct sunshine (if the temperature does not exceed 35°C), both during tiling and the adhesive setting. Rapid setting – use of rapid setting cement in the adhesive formula allows for rapid increase of adhesion and strength, especially during the initial setting (first 2-3 hours after

 ATLAS GEOFLEX ATLAS GEOFLEX recipe contains a unique siliceous gel technology. The siliceous gel offers exceptional ability of water retention. It fills the pores formed at the stage of adhesive setting by the net of inorganic bindings. The accumulation of mixing water ensures full cement hydration, regardless of the cladding type in use. Owing to the appropriate water management, which is necessary for the binding process completion, gel adhesive assures full adhesion to substrates of various absorptivity levels. The use of siliceous gel technology gives the advantages: • possibility of fixing cladding of any type, both absorbable and non-absorbable, • possibility of optimum adaptation of the adhesive consistency to individual contractor’s preferences and actual needs resulting from particular use, by dosing water within a range much wider than in case of traditional adhesives, • full adhesive spreading beneath the tiles, which improves adhesion and bond durability, particularly in

Atlas Cerplast Primes substrates for ATLAS thin-coat renders – mineral, acrylic and mosaic. Increases adhesion – strongly adheres to the substrate and the applied renders . Limits the absorbability of the substrate – prevents excessive transfer of water from the freshly applied renders into the substrate. • ensures ideal adhesion of the render • reduces absorbability and strengthens the substrate • facilitates render application and texture forming • unifies the substrate colour • available in several coloursThe main parameters• consumption: ca. 0,3 kg / m² • adhesion: > 1.0 MPa • drying time: 4 ÷ 6 h Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk