Insulationbee ltd Shop! Buy your insulation materials online

Dulux colour mixing Satinwood Dulux colour mixing Satinwood paint gives interior wood and metal a hard-wearing, subtle sheen finish . Ideal for adding a modern effect to your home. Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry. Finish: Satin Coverage: Up to 16m2 / litre Drying Time: 6 hours Coats: 2 Water based, low odour Quick drying Step 1: Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate Polycell products. Step 2: After use, remove as much paint as possible

 Dulux Quick Dry Satinwood Dulux Quick Dry Satinwood creates a mid-sheen satin finish , providing a subtle, attractive alternative to gloss. It is self-undercoating, wipeable, non-yellowing and suitable for use on interior wood and metal. Thanks to its Quick Dry, low odour formulation, it's both convenient and pleasant to use. Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp. TIP: if the colour change is strong, more coats may be required. Finish: Satin Coverage: Up to 16m2/litre Drying Time: Leave 6 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry. Coats: 2 Water based, low odour Quick drying Non drip Stays white Step 1: Make sure the surface is clean (no dirt or grease) and dry. When painting radiators, make sure that they are cold. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple col

Dulux Light+Space Quick Dry Satinwood Dulux Light+Space Quick Dry Satinwood for wood and metal surfaces makes any room feel brighter and more spacious. Its patented LumiTec formulation works with light-reflective particles to reflect up to twice as much light back into your room when used with Dulux Light+Space Matt. Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp. TIP: if the colour change is strong, more coats may be required. Finish: Satin Coverage: Up to 13m2/litre Drying Time: 6 hours Coats: 2 Lumitec Quick drying Light & space enhancing Step 1: Make sure the surface is clean (no dirt or grease) and  dry. If a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with a suitable knotting solution. If the surface is damaged, repair using the appropriate Polycell product. When painting radiators, make sure that they are cold. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store p

 Dulux Once Satinwood Dulux Once Satinwood has been specially formulated to give a perfect satin finish on interior primed or painted wood or metal surfaces in just one coat. It does not require an undercoat. Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats. Finish: Satin Coverage: Up to 12m2/litre Drying Time: 16 hours Coats: 1 One coat No undercoat required Step 1: Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry. Step 2: For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner. Step 3: Store paint in dry conditions and protect from extreme temperatures Multiple colours available; to