Insulationbee ltd Shop! Buy your insulation materials online

Ceresit CT 84 polyurethane adhesive Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation. After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our f

Ceresit CT 84  Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation.  After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our friendly staff on 020

 WIM Flex Express S1 WIM Flex Express S1 is a highly flexible, deformable adhesive mortar for fixing ceramic, porcelain and clinker tiles of all sizes and absorbability, exposed to extremely difficult conditions of use and deformation, indoors and outdoors. Particularly recommended for use in places that cannot be left out of service for a long time, and wherever it is necessary to quickly do the work and put the cladding to use – laying tiles in the only bathroom in the apartment, in passageways, corridors, on the stairs, night quick repairs of shops etc. It is irreplaceable when used in conditions of reduced temperatures (early spring, late autumn), when short periods of temperatures above +5 oC (i.e. minimum temperatures at which adhesives and cement mortars can be used) preclude the use of normally binding adhesives. Side tile Tooth height Consumption (kg / m²) up to 10 cm 4 mm 1.6-2.0 20-25 cm 6-8 mm 3.0-4.0 over 30 cm 8-12 mm 4.0-6.0 Please speak to one of our friendly staff on

 CM 16 Express CM 16 Express mortar is particularly useful during renovation works and when it is important to put the premises into operation quickly. The mortar allows foot traffic and pointing after just 3 hours from the moment the facing is glued. CM 16 Express is used for fixing ceramic tiles (glaze, terracotta, gres), cement and natural stone (resistant to discoloration) on substrates such as: concrete, cement screed, cement and cement-lime plaster, and heated floors. It works well in places exposed to intense traffic and utility loads, such as: communication routes, corridors, schools, supermarkets, shops, restaurants, etc. It can be used inside and outside buildings, in housing and general construction. Also (only inside buildings) on gypsum, anhydrite, aerated concrete substrates, strong paint coatings, existing tiles, cellular concrete. In the case of fixing tiles made of stone sensitive to discoloration, it is absolutely necessary to carry out own application tests to check

ATLAS GEOFLEX EXPRESS ATLAS GEOFLEX EXPRESS contains the unique siliceous gel technology. The siliceous gel offers exceptional ability of water retention which ensures full cement hydration, regardless the cladding type in use. Use of the siliceous gel technology allows for: • fixing cladding of any type, both porous and low suction, • optimum adaptation of the adhesive consistency to individual contractor’s preferences and actual needs resulting from particular use, by dosing water within a range much wider than in case of traditional adhesives, • full adhesive spread underneath the tiles, which improves adhesion, particularly in case of outdoor use, • safe cladding installation on substrates exposed to direct sunshine (if the temperature does not exceed 35°C), both during tiling and the adhesive setting. Rapid setting – use of rapid setting cement in the adhesive formula allows for rapid increase of adhesion and strength, especially during the initial setting (first 2-3 hours after

ATLAS GEOFLEX EXPRESS ATLAS GEOFLEX EXPRESS contains the unique siliceous gel technology. The siliceous gel offers exceptional ability of water retention which ensures full cement hydration, regardless the cladding type in use. Use of the siliceous gel technology allows for: • fixing cladding of any type, both porous and low suction, • optimum adaptation of the adhesive consistency to individual contractor’s preferences and actual needs resulting from particular use, by dosing water within a range much wider than in case of traditional adhesives, • full adhesive spread underneath the tiles, which improves adhesion, particularly in case of outdoor use, • safe cladding installation on substrates exposed to direct sunshine (if the temperature does not exceed 35°C), both during tiling and the adhesive setting. Rapid setting – use of rapid setting cement in the adhesive formula allows for rapid increase of adhesion and strength, especially during the initial setting (first 2-3 hours after