Insulationbee ltd Shop! Buy your insulation materials online

Śnieżka Eko Plus Śnieżka Eko Plus is a Matte latex paint for walls and ceilings. The paint is intended for decorative painting of walls and ceilings inside rooms: with cement, cement-lime, lime, gypsum mortars, gypsum boards, wood, wood-based panels and wallpapers, also those made of fiberglass. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Śnieżka Eco White Acrylic Paint Śnieżka Eco White Acrylic Paint gives a matt, snow-white and fully allows “breathing walls” coating. It does not cause irritation, it is friendly for allergy sufferers and particularly sensitive people – tests carried out by the Department of Clinical and Environmental Allergology of the Collegium Medicum of the Jagiellonian University have confirmed that this emulsion does not have an allergenic or irritating effect. Advantages: organic product perfect coverage optimal performance ensures wall breathing hypoallergenic Application: The paint is intended for decorative painting of walls and ceilings made of cement, cement-lime, lime, gypsum, plasterboard, wooden and wood-based materials indoors. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 49 Silix XD Ceresit CT 49 Silix XD® nano-silicone paint is equipped in selected modified silicone and polysiloxane resins together with special fillers and pigments. Thanks to extremely high hydrophobia of the coat surface, reached by use of PTFE additives the “pearl” effect appears – inmigration of water and dirt is strongly limited. Nevertheless the coat is highly permeable to water vapour.  CT 49 Silix XD® extends the aesthetic effect and durability of the coated surface.CT 49 Silix XD® is used outdoor and indoor, especially suggested for protecting of coated areas against weathering (e.g. sour rain), biological corrosion and in cases where high durability and dirt-resistance is required. It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters) that have never been painted before.This paint can be used for painting Ceresit: CT 35 and CT 137 mineral plasters, Ceresit: CT 60, CT 63, CT 64 acrylic plasters, Ceresit: CT

Ceresit CT 48 Ceresit CT 48 is used for protecting façades, concrete constructions, interiors. It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters). This paint can be used for painting Ceresit: CT 34, CT 35 and CT 137 mineral plasters, Ceresit: CT 60, CT 63, CT 64 acrylic plasters, Ceresit: CT 72, CT 73 silicate plasters, Ceresit CT 174, CT 175 silicate-silicone plasters as well as silicone plasters Ceresit: CT 74, CT 75 applied on traditional substrates and within Ceresit ETICS with the application of EPS-boards The structure of the coating ensures fast moisture evaporation from the substrate and at the same time creates an efficient protection against the substrate moisture and humidity. The binder used in the paint CT 48 causes a pearl like effect of water after wetting the coat. It is highly recommended to use CT 48 in historical objects, on the renovation and aerated plasters as well as on all the surfaces where aesthetic

Ceresit CT 174 Ceresit CT 174 combines good points of silicate plaster and silicone plaster. It is vapour permeable, of low absorbability and dirt resistant. CT 174 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 174 as façade plaster within a complex system of warming walls of outside buildings Ceresit Ceretherm ETICS with the application of EPS-boards and mineral wool. In case of intensive dark colours, the material application should be limited to small areas, e.g. architectural details. Plaster CT 174 is protected form biological paralyses, e.g. fungus, mould and algae. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT137 Ceresit CT137 is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, gypsum-fibre boards, etc. We recommend the application of the plaster CT137 as facade plaster within Ceresit ETICS and EPS-boards or facade mineral wool boards. The plaster CT137 is manufactured in several colours to be applied as the final layer of the external wall as well as in the option to be painted,e.g. with Ceresit CT54 silicate paint or Ceresit CT48 silicone paint and Ceresit CT42/ CT44 acrylic paints (in case of applying Ceresit Ceretherm Wool systems). Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL C-35 CEKOL C-35 is a high quality material used for smoothing and refining of external walls (façades) of buildings, but it can also be used internally, particularly in rooms exposed to high humidity (e.g. bathrooms, saunas, refrigerated chambers). CEKOL C-35 is an elastic, frost and water proof plaster. It is a dry mixture of high quality white cement, white mineral fillers and modified substances which guarantee excellent workability and adhesion to mineral bases (e.g. concrete, bricks). CEKOL C-35 does not contain toxic substances or components which turn yellow when exposed to atmospheric conditions. It is an excellent primer for emulsion, acrylic, gloss and mineral paints, where its white colour provides better coverage for paint so to help achieve a full colour effect. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 177 Ceresit CT 177 is used for applying decorative colourful plasters to traditional plasters, concrete substrates, gypsum substrates and chipboards, gypsum cardboards, etc. Transparent silicone-acrylic resins are the binder and coloured quartz gravels size 1.0-1.6 mm or 1.4-2.0 mm which are the fillers. This material is designed for applying with a metal long float. When it is set, the colourful plaster is obtained. The properties of the material allow for bridging the existing scratches in the substrate. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Reinforcing Fibreglass Mesh roll Reinforcing Fibreglass Mesh roll is for reinforced layer (base coat) installation. It is designed to be embedded in the adhesive layer during installation of thermal insulation systems both with polystyrene and mineral wool. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

MAPEI MAPENET 150 Fibreglass mesh  MAPENET 150 Fibreglass mesh is an alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Buy Fiberglass reinforcing mesh Fiberglass reinforcing mesh is coated with acrylic acid copolymer liquid and is therefore water, alkali and age resistant. The mesh has high tensile strength, good dimensional stability, good elasticity, capillary action and corrosion resistance. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 325 Ceresit CT 325 is a reinforcing mesh for embedding into reinforcing mortars for Ceresit External Thermal Insulation Composite Systems (ETICS). For façades or pedestals exposed to higher mechanical loads, it is preferred to use CT 325 in two layers or use higher density mesh of 330 g/m2. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Bella-Plast BP13 PVC Strips no splits in the junction of window frame and the plaster no penetration of water under the thermal facing by the window reveal equal, esthetic finishing of the plaster around the window Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 METPOL Corner with mesh METPOL Corner with mesh is ideal for use with external wall insulation . Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Bella-Plast Corner bead PVC Bella-Plast Corner bead PVC with mesh is ideal for use with external wall insulation . Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Bella-Plast BP14 PVC weather beads with mesh  Bella-Plast BP14 PVC weather beads with mesh  beads to install with base track draining takes place far from the elevation’s surface reinforcement as well as even and aesthetic finishing of the lower edges of the elevation simple, quick mounting Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Wkret-met polystyrene fixing plug Wkret-met polystyrene fixing plug is ideal for use in external wall insulation. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Metpol base track Metpol base track is ideal for polystyrene. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Styropoz Styrofoam EPS White Styropoz Styrofoam boards are an excellent insulation material for jointless insulation systems for external walls of buildings (light-wet method) or as an insulation and construction element in glued sandwich panels. High resistance to tearing and shearing of panels with low weight allows safe insulation for all types of thin-layer plasters: incl. mineral, acrylic or silicate. The highest quality of our products is used in residential and industrial construction, in the implementation of buildings erected with modern technologies. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Styropoz Styrofoam Styropoz Styrofoam boards are an excellent insulation material for jointless insulation systems for external walls of buildings (light-wet method) or as an insulation and construction element in glued sandwich panels. High resistance to tearing and shearing of panels with low weight allows safe insulation for all types of thin-layer plasters: incl. mineral, acrylic or silicate. The highest quality of our products is used in residential and industrial construction, in the implementation of buildings erected with modern technologies. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

STYROPIAN HYDROPIAN EPS P100 STYROPIAN HYDROPIAN EPS P100 is extruded polystyrene – an excellent thermal insulation material used in construction for many years. Its basic advantages are very high resistance to mechanical loads, extremely low water absorption even with long-term operation and particularly good thermal insulation properties. XPS foam is also completely resistant to fungi and mold, is not susceptible to biological corrosion and is not toxic. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Styropoz EPS Styropoz EPS expanded polystyrene boards, thanks to their increased compressive strength, are an excellent insulation material for floors on the ground for concrete screeds, underfloor heating, for flat roofs and industrial floors. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT315 Ceresit CT315 Styrofoam boards are an excellent insulation material for jointless insulation systems for external walls of buildings (light-wet method) or as an insulation and construction element in glued sandwich panels. High resistance to tearing and shearing of panels with low weight allows safe insulation for all types of thin-layer plasters: incl. mineral, acrylic or silicate. The highest quality of our products is used in residential and industrial construction, in the implementation of buildings erected with modern technologies. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit ZU Ceresit ZU mortar is used for insulation of external walls of buildings by the light-wet method with the use of foamed polystyrene boards. Is a component of complex external wall insulation systems (ETICS) of Ceresit Ceretherm buildings. Ceresit ZU mortar is used both for fixing foamed polystyrene boards and for making a reinforced protective layer when insulating newly erected buildings as well as those undergoing thermorenovation. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanized sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialized equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 87 mortar Ceresit CT 87 mortar is used for insulating external walls of buildings by the light-wet method with the use of foamed polystyrene boards or facade panels made of mineral wool. It is a component of jointless insulation systems for external walls of Ceresit Ceretherm buildings. CT 87 mortar is used to make a protective reinforced layer when insulating newly erected buildings as well as those undergoing thermorenovation, and to fix facade thermal insulation boards. Ceresit CT 87 is additionally reinforced with fibers, and thus even more resistant to scratches and cracks. The use of CT 87 (color, surface and organic modifiers) allows it to skip the process of preparing its surface by priming with primers before applying any Ceresit plasters. The content of special light fillers gives the mortar a more plastic, light and homogeneous consistency, it is easier to mix, apply and spread, while increasing the mortar efficiency. Please speak to one of our friendly staff