Insulationbee ltd Shop! Buy your insulation materials online

WIM DIAMOND FLEX  WIM DIAMOND FLEX IS A TWO-COMPONENT FAST ADJUSTMENT WHITE HIGH FLEXIBLE HIGH DEACTICATE ADHESIVE MORTAR Highly deformable and highly flexible white adhesive mortar for fixing ceramic, porcelain and clinker tiles of all sizes and absorbability, indoors and outdoors. Especially recommended for installing glass mosaic and natural stone (e.g. marble, granite, travertine) even in bright colors. The mortar can be used for gluing tiles on drywall walls, old tiles – “tile for tile”, OSB, terrazzo, floors with underfloor heating, on properly made and dried waterproofing coatings in shower cabins, on terraces and in swimming pools. Due to the quick drying time (2h), it is perfect for use in places that cannot be long out of use (laying tiles in one bathroom in the apartment, in passageways, corridors, on stairs, night quick repairs of stores, etc.). Side plate Tooth height Consumption (kg / m²) up to 10 cm 4 mm 1.6-2.0 20-25 cm 6-8 mm 3.0-4.0 over 30 cm 8-12 mm 4.0-6.0 Please

WIM CONTACT LAYER WIM CONTACT LAYER IS A SYNTHETIC LIQUID DISPERSION FOR IMPROVE MINERAL MORTARS, AND CREATING CONTACTS LAYERS For priming difficult and non-absorbent substrates, before application of tile adhesives, waterproofing, plaster, self-leveling compounds and fillers etc. on vertical and horizontal surfaces. Increases adhesion to primed substrates strongly adhering to it, creating at the same time thanks to its compact shell structure and rough surface suitable for any kind of imposed mineral materials. After drying, formulation forms a barrier between the substrate and the newly applied layer, restricting their interaction. Improves adhesion On OSB and terrazzo On old ceramic tiles On old paint Quick-drying No-solvent Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Larsen Professional Flexible Standard Set+  Larsen Professional Flexible Standard Set+ is a specially-formulated, fully flexible, S1 rated, non-slip, standard-setting, cement-based adhesive with extended open time. It is suitable for beds of 3 – 20 mm, interior, exterior, floor and wall applications. Pro Flexible Standard Set+ is suitable for fixing most types of tiel and is recommended fro fixing glass mosaics, porcelain, natural stone and large format tiles. It is recommeded for use on more demanding areas including with large format wall tiles, on timber substrates and in swimming pools. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Primacol Glastatex Primacol Glastatex is a ready-to-use adhesive for fiberglass and interlining wallpapers. The product can also be used for gluing heavy, vinyl, textile and structural wallpapers. Glastatex guarantees professional, durable and very strong bonding of wallpaper to the wall, which powder adhesives cannot provide. The joint after drying is transparent. Always read the wallpaper manufacturer’s instructions before applying the adhesive. How to use: The glue should be mixed thoroughly before use. Apply the product to the wall with a paint roller or brush. Pay attention to the even distribution of the adhesive on the wall. Wallpapering should be done with stripes, i.e. apply glue to a part of the wall about 1.5 m wide, glue the wallpaper strip, align and press, push any air bubbles off the edge of the wallpaper using a rubber roller or cloth. Apply glue to another part of the wall and glue another strip of wallpaper. This way of wallpapering is related to the fast setting of

Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanised sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialised equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. replaces traditional glues and cement mortars ready to use does not require the use of electrical equipment, water or specialized equipment highly efficient (up

Ceresit CT 17  Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate) it strengthens the surface reduces the absorbability of the substrate improves adhesion to the ground permeable makes it easier to apply subsequent layers, eg glues, putties, floors, paints Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 49 White Ceresit CM 49 is used for the high-strength, void-free installation of ceramic tiles and slabs, both indoors and outdoors, using the thin-, medium- or thick-bed method (20mm). CM 49 Multi Xpress sets rapidly.   It can also be used for bonding large-tiles and slabs, and discoloration-proof installation of non-translucent natural stones. Special mega flexible white tile adhesive for demanding substrates For large tiles and plates more than 120cm side length Resistant to climate stresses on balconies, terraces and heated floors (S2 class) On young/green screet Can be used for Natural stone and marble Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk  

Ceresit CT 17 Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate) it strengthens the surface reduces the absorbability of the substrate improves adhesion to the ground permeable makes it easier to apply subsequent layers, eg glues, putties, floors, paints Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 49 ​​ Ceresit CM 49 is used for the high-strength, void-free installation of ceramic tiles and slabs, both indoors and outdoors, using the thin-, medium- or thick-bed method (20mm).   It can also be used for bonding large-tiles and slabs, and discoloration-proof installation of non-translucent natural stones Special mega flexible white tile adhesive for demanding substrates For large tiles and plates more than 120cm side length Resistant to climate stresses on balconies, terraces and heated floors (S2 class) On young/green screet Can be used for Natural stone and marble Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 22 Ceresit CM 22 Mega Format Flexible tile adhesive ensures a highly flexible adhesive bed on critical surfaces. Its consistency is adjustable therefore CM 22 is very well suited for large format tiles – it is perfect for use on heated screeds, balconies, patios, especially on young precast concrete members (at least 3 months old). CM 22 can be taken also to repair and level unevennesses of up to approx. 8 mm depth prior to tile laying. Special tile adhesive for application of mega format plates on difficult substrates For large tiles and plates up to 120cm side length Very easy application Adjustable consistency for wall and floor Very high tolerances and an increased retention of water (6.8 – 8.8 litres of water) Resistant to surface deformation on balconies, terraces and heated floors (S1 class) For indoor and out-door use Thin and middle bed method Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 17 Ceresit CM 17 SUPER FLEXIBLE tile adhesive is designed for laying ceramic, cement and stone tiles (except marble) on deformable substrates. Its characteristics guarantee a flexible connection with the substrate and transmission of squeezing stresses between tiles and the substrate. Therefore, CM 17 SUPER FLEXIBLE is recommended for laying tiles on thin partition walls, heated floors, elevations, terraces, balconies, pool basins and technological water reservoirs. Premium, flexible  tile adhesive  with high adhesive strength for all kind of tiles on difficult substrates Highest adhesion strength and flexibility Safe application even in extreme conditions Resistant to substrate deformations on balconies, terraces and on heated floors High load resistance For critical substrates (e.g. tile-on-tile) For pools and wet areas For large format tiles (> 1m), porcelaine and natural stone For indoor and outdoor use Please speak to one of our friendly staff on 02038839057 Buy you

 Ceresit CM 16 WHITE Ceresit CM 16 WHITE mortar is used for fixing tiles made of marble, granite, sandstone, travertine, conglomerate, light limestone and other coarse-grained rocks resistant to discoloration. It is also suitable for gluing ceramic and porcelain tiles, glaze, terracotta and all types of mosaic, e.g. glass and ceramic. Each time, before fixing the tiles, it is recommended to make your own application test in order to check that the mortar does not discolor the tiles. The properties of the mortar make it possible to fix the tiles on gypsum-fiber boards and gypsum-cardboard boards on substrates such as anhydrite screeds, gypsum and aerated concrete substrates and on sealing coats. It can be used on terraces, balconies, stairs, heated floors, facades as well as on OSB boards and on the existing ceramic cladding (only inside rooms). It also works well in places exposed to intense traffic and utility loads, such as: communication routes, corridors, schools, supermarkets, sh

Ceresit CM 16 PRO The technologically advanced CM 16 PRO mortar has: The only adhesive mortar with 3 technologies – AERO, Micro-Gel, Fiber Force AERO technology: perfectly aerated, plastic consistency MICRO GEL technology: grouting after 12h, application at elevated temperatures Reinforced with Fiber Force fibers – greater grip and flexibility 3in1 – medium layer up to 10mm, leveling, stable in various thicknesses recommended for all types of tiles for small, medium and large format tiles for balconies and terraces the ability to adjust the consistency Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 CM 16 Express CM 16 Express mortar is particularly useful during renovation works and when it is important to put the premises into operation quickly. The mortar allows foot traffic and pointing after just 3 hours from the moment the facing is glued. CM 16 Express is used for fixing ceramic tiles (glaze, terracotta, gres), cement and natural stone (resistant to discoloration) on substrates such as: concrete, cement screed, cement and cement-lime plaster, and heated floors. It works well in places exposed to intense traffic and utility loads, such as: communication routes, corridors, schools, supermarkets, shops, restaurants, etc. It can be used inside and outside buildings, in housing and general construction. Also (only inside buildings) on gypsum, anhydrite, aerated concrete substrates, strong paint coatings, existing tiles, cellular concrete. In the case of fixing tiles made of stone sensitive to discoloration, it is absolutely necessary to carry out own application tests to check