Insulationbee ltd Shop! Buy your insulation materials online

CEKOL F-16 Finisz CEKOL F-16 Finisz is a ready-to-use, easily grindable putty. Recommended for classical grinding as well as wet treatment CEKOL F-16 Finisz can be used indoors in dry rooms, on concrete and plaster substrates, plasterboard panels, seasoned traditional cement-lime plasters, as well as acrylic paint coats with high surface adhesiveness. When dry, all paint types can be applied on it. The product can be applied manually or mechanically with suitable machines and tools. It is a mixture of special polymer binders, mineral fillers and modifying additives.

CEKOL A-45 FINISZ CEKOL A-45 FINISZ is particularly useful for final surface smoothing before painting. It gives a perfectly smooth, easy-to-paint surface and does not become yellowish as a result of exposure to light. Possible small unevenness can be polished with sandpaper or lathe when dry. When CEKOL A-45 FINISZ is dry, all paint types can be applied. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Dulux Once Eggshell Dulux Once Eggshell has been specially formulated to give a perfect low sheen finish on interior and primed or painted wood or metal surfaces in just one coat. It does not require an undercoat. Dulux Once is also available in Emulsion, Gloss and Satinwood. Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats. Finish: Eggshell Coverage: Up to 30m2 / litre Drying Time: 6 hours Coats: 1 One coat No undercoat required Step 1: Scrape: remove flaking or defective paint and sand down the surface to remove any sheen. Clean- make sure the surface is clean (no dirt or grease) and dry. Seal: if a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with suitable knotting solution. If the surface is damaged, repair using the appropriate Polyc

Dulux colour mixing Satinwood Dulux colour mixing Satinwood paint gives interior wood and metal a hard-wearing, subtle sheen finish . Ideal for adding a modern effect to your home. Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry. Finish: Satin Coverage: Up to 16m2 / litre Drying Time: 6 hours Coats: 2 Water based, low odour Quick drying Step 1: Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate Polycell products. Step 2: After use, remove as much paint as possible

 Dulux Quick Dry Satinwood Dulux Quick Dry Satinwood creates a mid-sheen satin finish , providing a subtle, attractive alternative to gloss. It is self-undercoating, wipeable, non-yellowing and suitable for use on interior wood and metal. Thanks to its Quick Dry, low odour formulation, it's both convenient and pleasant to use. Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp. TIP: if the colour change is strong, more coats may be required. Finish: Satin Coverage: Up to 16m2/litre Drying Time: Leave 6 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry. Coats: 2 Water based, low odour Quick drying Non drip Stays white Step 1: Make sure the surface is clean (no dirt or grease) and dry. When painting radiators, make sure that they are cold. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple col

 Dulux colour mixing Eggshell Dulux colour mixing Eggshell paint gives interior wood and metal (including heated surfaces) a durable, low sheen finish . Ideal for delivering a contemporary look to a modern or period property Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Eggshell using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry. Finish: Eggshell Coverage: Up to 16m2 / litre Drying Time: 6 hours Coats: 2 Long lasting protection Quick drying Water based, low odour Step 1: Remove any flaking or defective paint. Sand down to remove any sheen. ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate