Insulationbee ltd Shop! Buy your insulation materials online

ROCKWOOL High Performance Partial Fill Cavity Slab Buildings, whether residential or commercial, require effective insulation to keep the weather out and importantly, the heat in. The ROCKWOOL High Performance Partial Fill Cavity Slab has been developed to provide effective thermal insulation for both masonry and frame constructions. Buy yours with us today at www.insulationbee.co.uk or speak to one of our friendly staff on 02038839057

A guide to cavity wall insulation Many houses in the UK (particularly those built prior to the 1990s) tend to lack wall insulation, meaning that up to a third of a house’s heat escapes through the walls more easily. In UK housing, most houses built from the 1990s onwards tend to already have wall insulation installed to reduce heat loss.  Older buildings however, may not have any insulation at all. Post-1920s buildings are more likely to have cavity walls.  These walls are made up of two walls with a gap in between, with an outer layer made of brick and inner layer made up either of brick or concrete block. On the other hand, pre-1920s buildings tend to have solid walls. These walls have no cavity, just a single solid wall made of either brick or stone. Enter cavity wall insulation . Cavity wall insulation contains heat within the inner walls of your house, reflecting it back inside into the room(s) and keeping it inside for longer. This results in more even temperatures and eliminates

EcoTherm Eco-Cavity Partial fill cavity wall insulation EcoTherm Eco-Cavity Partial fill cavity wall insulation is a fibre free rigid polyisocyanurate (PIR) insulation core with aluminium foil composite to both sides. The boards are conveniently sized to coordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing. Thermal conductivity: 0.022 W/mK Euroclass: F Dimensions: 1200 x 450 mm (0.54m2) Thickness: 40 - 100 mm Facing: Aluminium composite foil Core: Fibre free rigid polyisocyanurate (PIR) insulant manufactured with a blowing agent that is CFC/HCFC free and has zero Ozone Depletion Potential (ODP) with a low Global Warming Potential (GWP) Compressive strength: 140 kPa when tested at 10% compression to BS EN 826: 2013 Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk