Skip to main content

Buy CEKOL DL-80

By

CEKOL DL-80


CEKOL DL-80 is a water-borne, solvent-free, deeply penetrating emulsion used for priming absorbable gypsum, concrete and brick substrates under putty, leveling with self-leveling mortars, gluing ceramic tiles. Can be used inside and outside buildings. The CEKOL DL-80 emulsion can be used to protect plaster surfaces against moisture and weather conditions.


CEKOL DL-80 emulsion is non-toxic and non-flammable. Does not contain organic solvents. Strengthens substrates, seals them, increases adhesion of putty and adhesive mortars to the substrate and spout. Prevents harmful chemical reactions between gypsum and cement. With self-leveling screeds, it prevents the water from absorbing too quickly through the subfloor, improving flowability and reducing bubble formation. CEKOL DL-80 improves evenness in the application of mortars when plastering and leveling. Priming the plaster surface makes painting easier. After drying, a transparent, slightly shiny coating is formed on the surface, resistant to water and alkaline factors, which does not inhibit the exchange of water vapor and gases with the environment.


Please speak to one of our friendly staff on 02038839057

Buy yours with us today at www.insulationbee.co.uk

Labels:

Comments

Post a Comment

Popular posts from this blog

Buy 38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard

By
38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard A high performing insulating  plasterboard . Designed for use in British Gypsum wall lining and partition systems where both moisture resistance and greater thermal performance are required. 12.5mm  British Gypsum  Gyproc Moisture Resistant Board factory bonded to rigid Polyisocyanurate foam with zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5. Both faces of the Polyisocyanurate insulant are lined with a multi-layer vapour control barrier, with a Class 0 fire performance (Euroclass B-S 1, d0). CLICK HERE TO BUY YOURS TODAY    38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard Product Details Thickness:  38mm All Thickness:  38mm,53mm,63mm,78mm,93mm Length:  2400mm Width:  1200mm Weight:  10.10kg/m2 Coverage:  2.88m2 Thermal Conductivity:  Gyproc WallBoard 0.19W/mK Thermal Conductivity:  Polyisocyanurate foam 0.022W/mK Fire rating:  B class0 Thermal resistance: 
Post a Comment
Read more

Buy Acoustic Roll

By
Acoustic Roll Acoustic Roll is a Glass Mineral Wool roll, designed for use in internal wall and floor applications, to offer sound absorption and noise reduction properties. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Proven test results with all major brands of plasterboard to provide assured compliance with sound related building regulations. Manufactured density in excess of 10kg/m³ meeting the requirements outlined within relevant sound related building regulations. Rolls are designed to fit between studs to close joints, reducing the potential for unwanted gaps and ensuring high levels of sound insulation. Buy yours with us today at www.insulationbee.co.uk or speak to one of our friendly staff on 02038839057
Post a Comment
Read more

Buy Knauf Insulation Loft Roll 44

By
Knauf Insulation Loft Roll 44 Knauf Insulation Loft Roll 44 is a Glass Mineral Wool roll, designed for use in cold lofts where pitched roofs are insulated at ceiling level, that offers good thermal performance in the range. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Knauf Insulation Loft Roll 44 is available in the following formats: Combi-cut rolls Ready-cut rolls Uncut rolls Short length, combi-cut rolls Benefits: Compression packed and lightweight for easy handling and moving around a site. Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency. Ready-cut products are supplied cut to size to maximise on-site efficiency. Uncut products provide the flexibility to be cut to size to fit between joists or can be left in f
Post a Comment
Read more