Insulationbee ltd Shop! Buy your insulation materials online

Ceresit CM 16 CM 16 ensures a flexible adhesive bed and balances squeezing stresses on critical substrates – therefore well suited for use on heated screeds, balconies, patios and facades, especially on young precast concrete members (at least 3 months old). Easy to apply on balconies, patios and permanently wet areas (domestic + public) indoor and outdoor For easily deformable and difficult substrates (especially tile-on-tile, OSB) Resistant over underfloor heating Recommended for earthenware, porcelain and natural stone tiles and insulating boards Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk  

 Ceresit CM 12 Plus Ceresit CM 12 Plus adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (discoloration-proof), indoors and outdoors. Ceresit CM 12 mortar can be used in areas exposed to water penetration and on heated floors. As a medium-bed mortar, CM 12 can be applied to repair and level surfaces with depressions of up to 8 mm before laying tiles. Flexible floor adhesive with plastic consistency Excellent working parameters+D1 For wet areas For underfloor heating For heavy traffic areas On non-deforming and sealed substrates For indoor or outdoor For ceramic and gres tiles Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 12 Ceresit CM 12 adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (discoloration-proof), indoors and outdoors. Ceresit CM 12 mortar can be used in areas exposed to water penetration and on heated floors. As a medium-bed mortar, CM 12 can be applied to repair and level surfaces with depressions of up to 8 mm before laying tiles. Walkable and groutable after 3 hours For indoor and outdoor For ceramic and gres tiles up to 80 cm on one side Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 11 PLUS Ceresit CM 11 PLUS adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (colour-fast), indoors and outdoors. Thanks to a special combination of fillers, the new mortar CM 11 PLUS is easy to apply, therefore making the progress of work faster. For larger tiles up to 0.25 m² and 60 cm side-length Extra ANTI-SLIP with larger tiles Grouting on the wall after only 8h (gres tiles) Low-emission certified ”EC1 PLUS®” Easy mixing and spreading For use on waterproofed surfaces For indoor use, also in wet rooms, outdoor use possible in some cases (domestic area) For gres and ceramic tiles Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 11 Ceresit CM 11 mortar is suitable for ceramic (glazed, terracotta), porcelain, cement and stone tiles (except marble), on non-deformable substrates such as concrete, cement screed, cement and cement-lime plaster. It can be used inside buildings. In the case of other surfaces, on deformable substrates, such as: plasterboards, chipboards, floors, balconies, terraces, use appropriate CM adhesive mortars for interior ceramic and porcelain tiles stable on vertical surfaces – no runoff for dry and damp rooms increased operating parameters Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL GS-83 Kontakt CEKOL GS-83 Kontakt is a product used for priming smooth surfaces, ceilings and prefabricated elements made from smoothly planked concrete or reinforced concrete elements. It reinforces the substrate, improves the bonding uniformity and increases the adhesion of plasters, putties and mortars to difficult surfaces. It can be used inside and outside buildings. After drying, the product creates a transparent rough coating resistant to water and alkaline agents. The coating does not inhibit the exchange of water vapour and gases with the environment. It is non-toxic and non-flammable. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL DL-80 CEKOL DL-80 is a water-borne, solvent-free, deeply penetrating emulsion used for priming absorbable gypsum, concrete and brick substrates under putty, leveling with self-leveling mortars, gluing ceramic tiles. Can be used inside and outside buildings. The CEKOL DL-80 emulsion can be used to protect plaster surfaces against moisture and weather conditions. CEKOL DL-80 emulsion is non-toxic and non-flammable. Does not contain organic solvents. Strengthens substrates, seals them, increases adhesion of putty and adhesive mortars to the substrate and spout. Prevents harmful chemical reactions between gypsum and cement. With self-leveling screeds, it prevents the water from absorbing too quickly through the subfloor, improving flowability and reducing bubble formation. CEKOL DL-80 improves evenness in the application of mortars when plastering and leveling. Priming the plaster surface makes painting easier. After drying, a transparent, slightly shiny coating is formed on the sur