Skip to main content

Buy Weathershield One Coat Gloss

By

 Weathershield One Coat Gloss



Weathershield One Coat Gloss from Dulux gives a beautiful high gloss finish and guarantees 6 year weather protection for exterior wood and metal.  Apply just one coat to cleaned, primed surfaces in good condition. The weatherproof paint film is mould resistant to minimise staining and flexible to resist cracking. This keeps your paintwork looking better for longer, compared to conventional Dulux gloss paints.


Apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 coat of Weathershield One Coat Exterior Gloss. Some dark colours may need a further coat. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.


Flame, Health hazard, Exclamation mark - Flammable liquid and vapour. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. - Contains - Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%) - Contains - 2-butanone oxime and IPBC. - May produce an allergic reaction. - Repeated exposure may cause skin dryness or cracking.


  • Finish: Gloss

  • Coverage: Up to 12m2/litre

  • Drying Time: Leave 16 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry.

  • Coats: 1

  • One coat

  • High gloss finish

  • Guarantee 6 years

  • Flexible paint film


Step 1: Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP) wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.


Step 2: For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.


Step 3: Store paint in dry conditions and protect from extreme temperatures. TIP: after use firmly secure the lid. To preserve the quality, briefly turn the can upside down and return to upright position to store.


Multiple colours available; to choose a colour, please speak to one of our friendly staff at 02038839057

Buy yours with us today at www.insulationbee.co.uk

Labels:

Comments

Post a Comment

Popular posts from this blog

Buy 38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard

By
38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard A high performing insulating  plasterboard . Designed for use in British Gypsum wall lining and partition systems where both moisture resistance and greater thermal performance are required. 12.5mm  British Gypsum  Gyproc Moisture Resistant Board factory bonded to rigid Polyisocyanurate foam with zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5. Both faces of the Polyisocyanurate insulant are lined with a multi-layer vapour control barrier, with a Class 0 fire performance (Euroclass B-S 1, d0). CLICK HERE TO BUY YOURS TODAY    38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard Product Details Thickness:  38mm All Thickness:  38mm,53mm,63mm,78mm,93mm Length:  2400mm Width:  1200mm Weight:  10.10kg/m2 Coverage:  2.88m2 Thermal Conductivity:  Gyproc WallBoard 0.19W/mK Thermal Conductivity:  Polyisocyanurate foam 0.022W/mK Fire rating:  B class0 Thermal resistance: 
Post a Comment
Read more

Buy Acoustic Roll

By
Acoustic Roll Acoustic Roll is a Glass Mineral Wool roll, designed for use in internal wall and floor applications, to offer sound absorption and noise reduction properties. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Proven test results with all major brands of plasterboard to provide assured compliance with sound related building regulations. Manufactured density in excess of 10kg/m³ meeting the requirements outlined within relevant sound related building regulations. Rolls are designed to fit between studs to close joints, reducing the potential for unwanted gaps and ensuring high levels of sound insulation. Buy yours with us today at www.insulationbee.co.uk or speak to one of our friendly staff on 02038839057
Post a Comment
Read more

Buy Knauf Insulation Loft Roll 44

By
Knauf Insulation Loft Roll 44 Knauf Insulation Loft Roll 44 is a Glass Mineral Wool roll, designed for use in cold lofts where pitched roofs are insulated at ceiling level, that offers good thermal performance in the range. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Knauf Insulation Loft Roll 44 is available in the following formats: Combi-cut rolls Ready-cut rolls Uncut rolls Short length, combi-cut rolls Benefits: Compression packed and lightweight for easy handling and moving around a site. Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency. Ready-cut products are supplied cut to size to maximise on-site efficiency. Uncut products provide the flexibility to be cut to size to fit between joists or can be left in f
Post a Comment
Read more