Skip to main content

Buy Weathershield Multi-Surface Fungicidal Wash

By

Weathershield Multi-Surface Fungicidal Wash


Weathershield Multi-Surface Fungicidal Wash from Dulux is suitable for brush application only to new or previously painted interior or exterior wood or masonry surfaces contaminated with mould, algae, fungi or lichen.

 Apply the solution to all affected areas with a brush. Leave for 24 hours and then thoroughly rinse and scrub with clean water to remove residues and dead growth. Failure to remove residues may result in discolouration of subsequently applied coatings. Repeat the process if necessary. Do not apply in wet weather. Badly affected areas, or if lichen is present may require the use of high pressure water-hosing to remove all organic growth completely. When the surface is fully dry, apply the appropriate Dulux or Weathershield finishing system. TIP: apply only in dry conditions, above 10°C and when bad weather is not forecast.

Causes serious eye irritation. Causes skin irritation. Harmful to aquatic life with long lasting effects.

  • Coverage: Up to 24m2/litre

  • Drying Time: Leave 16-24 hours to dry.

  • Coats: 1

  • Mouldtec formulation protects the paint against mould for five years, keeping your bathroom looking great for longer.

 

Step 1: Wash away mould, algae, fungi and lichen from wood or masonry. Suitable for brush application.

Step 2: Remove as much of this product as possible from the brush with a cloth and then wash with water.

Step 3: Store this product in dry conditions and protect from extreme temperatures.

 

Multiple colours available; to choose a colour, please speak to one of our friendly staff on 02038839057

Buy yours with us online at www.insulationbee.co.uk




Labels:

Comments

Post a Comment

Popular posts from this blog

Buy 38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard

By
38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard A high performing insulating  plasterboard . Designed for use in British Gypsum wall lining and partition systems where both moisture resistance and greater thermal performance are required. 12.5mm  British Gypsum  Gyproc Moisture Resistant Board factory bonded to rigid Polyisocyanurate foam with zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5. Both faces of the Polyisocyanurate insulant are lined with a multi-layer vapour control barrier, with a Class 0 fire performance (Euroclass B-S 1, d0). CLICK HERE TO BUY YOURS TODAY    38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard Product Details Thickness:  38mm All Thickness:  38mm,53mm,63mm,78mm,93mm Length:  2400mm Width:  1200mm Weight:  10.10kg/m2 Coverage:  2.88m2 Thermal Conductivity:  Gyproc WallBoard 0.19W/mK Thermal Conductivity:  Polyisocyanurate foam 0.022W/mK Fire rating:  B class0 Thermal resistance: 
Post a Comment
Read more

Buy Acoustic Roll

By
Acoustic Roll Acoustic Roll is a Glass Mineral Wool roll, designed for use in internal wall and floor applications, to offer sound absorption and noise reduction properties. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Proven test results with all major brands of plasterboard to provide assured compliance with sound related building regulations. Manufactured density in excess of 10kg/m³ meeting the requirements outlined within relevant sound related building regulations. Rolls are designed to fit between studs to close joints, reducing the potential for unwanted gaps and ensuring high levels of sound insulation. Buy yours with us today at www.insulationbee.co.uk or speak to one of our friendly staff on 02038839057
Post a Comment
Read more

Buy Knauf Insulation Loft Roll 44

By
Knauf Insulation Loft Roll 44 Knauf Insulation Loft Roll 44 is a Glass Mineral Wool roll, designed for use in cold lofts where pitched roofs are insulated at ceiling level, that offers good thermal performance in the range. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Knauf Insulation Loft Roll 44 is available in the following formats: Combi-cut rolls Ready-cut rolls Uncut rolls Short length, combi-cut rolls Benefits: Compression packed and lightweight for easy handling and moving around a site. Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency. Ready-cut products are supplied cut to size to maximise on-site efficiency. Uncut products provide the flexibility to be cut to size to fit between joists or can be left in f
Post a Comment
Read more