Skip to main content

Buy Kingspan Kooltherm K107 Pitched Roof Board Online

Image
By

Premium performance pitched roof insulation

Kingspan Kooltherm K107 Pitched Roof Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core.

It is used to insulate pitched roofs, ceilings and attic spaces, and has a thermal conductivity of just 0.018 W/m.K across all thicknesses.

Product Details

Thickness: 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm
Lenght: 2400mm
Width: 1200mm
Pack quantity: Please check k107 product pages
Thermal conductivity : 0.018 W/mK
Compressive Strength: 125 kPa
Facings: Low emissivity composite foil
Core: Premium performance rigid thermoset phenolic insulation
Fire rating: Class 1 (Class ‘O’ insulation core)
Material: Phenolic


Type: Roof Board

Product Facts

Low emissivity composite foil facing
Thermal conductivity 0.018 W/mK
BBA approved
Easy to handle and install
Negligible smoke obscuration
Non-deleterious material
Manufactured with a blowing agent that has zero ODP and low GWP
NPD fire rated insulation core
Resists moisture penetration
Green Guide Rating A+

Sitework Applications
- Insulating at Ceiling Level – Choice of Build Up
- Mansard Roofs / Walls
- Fire Stops
- Lightning Protection
- Over Rafter Insulation
- Over Rafter Insulation Without a Sarking Board
- Over Rafter Insulation With Slates Fixed Directly into a Sarking Board
- Over Rafter Insulation with a Sarking Board and Tiles on Tiling Battens and Counter–Battens
- Between Rafter Insulation Partially Filled Flush to the Top Surface of Rafters
- Between Joist Insulation
- Between Rafter Insulation Partially Filled Flush to the Bottom Surface of Rafters
- Over Joist Insulation
- Between Rafter Insulation Fully Filling the Depth of the Rafters
- Between Dwarf Wall Stud Insulation


- Under Rafter / Joist or Inside Dwarf Wall Studs Insulation

Links to buy ! UK Only
25mm Kingspan Kooltherm K107 Pitched Roof Board
30mm Kingspan Kooltherm K107 Pitched Roof Board
35mm Kingspan Kooltherm K107 Pitched Roof Board
40mm Kingspan Kooltherm K107 Pitched Roof Board
45mm Kingspan Kooltherm K107 Pitched Roof Board
50mm Kingspan Kooltherm K107 Pitched Roof Board
60mm Kingspan Kooltherm K107 Pitched Roof Board
70mm Kingspan Kooltherm K107 Pitched Roof Board
80mm Kingspan Kooltherm K107 Pitched Roof Board
90mm Kingspan Kooltherm K107 Pitched Roof Board
100mm Kingspan Kooltherm K107 Pitched Roof Board
110mm Kingspan Kooltherm K107 Pitched Roof Board
120mm Kingspan Kooltherm K107 Pitched Roof Board
130mm Kingspan Kooltherm K107 Pitched Roof Board
140mm Kingspan Kooltherm K107 Pitched Roof Board
150mm Kingspan Kooltherm K107 Pitched Roof Board
Mansard Roofs / Walls
Kingspan Kooltherm® K107 Pitched Roof Board can be used for the construction of insulated tiled or slated mansard roofs / walls. Design and installation guidance is as for pitched roofs.
Fire Stops
Current Building Regulations / Standards should be considered with regard to the requirements for, and provision of, fire stops.
Lightning Protection
Building designers should give consideration to the requirements of BS / I.S. EN 62305 (Protection against lightning).
The Facings
Kingspan Kooltherm® K107 Pitched Roof insulation Board is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective, low emissivity surface improves the thermal resistance of any unventilated cavity adjacent to the board.
The Core
The core of Kingspan Kooltherm® K107 Pitched Roof Board is a premium performance fibre–free rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).
Standards & Approvals
Kingspan Kooltherm® K107 Pitched Roof Board is manufactured to the highest standards under a management system certified to ISO 9001: 2008 (Quality Management Systems. Requirements), ISO 14001: 2004 (Environmental Management Systems. Requirements), BS OHSAS 18001: 2007 (Occupational Health and Safety Management Systems. Requirements) and ISO 50001: 2011 (Energy Management Systems. Requirements with Guidance for Use).
Fire Performance
Kingspan Kooltherm® K107 Pitched Roof Board, when assessed to the British Standard fire test specified in the table below, can achieve the following result shown, where the external finish of the pitched roof consists of slate or concrete roof tiles. For specifications with different external finishes please consult the roof finish manufacturer for their specific fire classification details.

If you want to buy or have any questions about Kingspan k107 insulation for pitched roofs  please call us on 02038839057! You can also text us back in our live chat.

Please find all datasheets in PDF & BROCHURES section.
Bee with us!! 
Sales@insulationbee.co.uk
InsulationBee Shop













Labels:







Location:
London, UK
























Comments







New comments are not allowed.












Popular posts from this blog



















Buy 38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard












By
























38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard A high performing insulating  plasterboard . Designed for use in British Gypsum wall lining and partition systems where both moisture resistance and greater thermal performance are required. 12.5mm  British Gypsum  Gyproc Moisture Resistant Board factory bonded to rigid Polyisocyanurate foam with zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5. Both faces of the Polyisocyanurate insulant are lined with a multi-layer vapour control barrier, with a Class 0 fire performance (Euroclass B-S 1, d0). CLICK HERE TO BUY YOURS TODAY    38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard Product Details Thickness:  38mm All Thickness:  38mm,53mm,63mm,78mm,93mm Length:  2400mm Width:  1200mm Weight:  10.10kg/m2 Coverage:  2.88m2 Thermal Conductivity:  Gyproc WallBoard 0.19W/mK Thermal Conductivity:  Polyisocyanurate foam 0.022W/mK Fire rating:  B class0 Thermal resistance:  




















Post a Comment









Read more






























Buy Acoustic Roll












By
























Acoustic Roll Acoustic Roll  is a Glass Mineral Wool roll, designed for use in internal wall and floor applications, to offer sound absorption and noise reduction properties. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Proven test results with all major brands of plasterboard to provide assured compliance with sound related building regulations. Manufactured density in excess of 10kg/m³ meeting the requirements outlined within relevant sound related building regulations. Rolls are designed to fit between studs to close joints, reducing the potential for unwanted gaps and ensuring high levels of sound insulation. Buy yours with us today at www.insulationbee.co.uk  or speak to one of our friendly staff on 02038839057




















Post a Comment









Read more






























Buy Knauf Insulation Loft Roll 44












By
























Knauf Insulation Loft Roll 44 Knauf Insulation Loft Roll 44  is a Glass Mineral Wool roll, designed for use in cold lofts where pitched roofs are insulated  at ceiling level, that offers good thermal performance in the range. It is non-combustible insulation with the best possible Euroclass A1 reaction to fire classification, and is manufactured using Knauf Insulation's unique bio-based binder, ECOSE® Technology. Knauf Insulation Loft Roll 44 is available in the following formats: Combi-cut rolls Ready-cut rolls Uncut rolls Short length, combi-cut rolls Benefits: Compression packed and lightweight for easy handling and moving around a site. Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency. Ready-cut products are supplied cut to size to maximise on-site efficiency. Uncut products provide the flexibility to be cut to size to fit between joists or can be left in f




















Post a Comment









Read more