Insulationbee ltd Shop! Buy your insulation materials online

Ceresit CL 51 Ceresit CL 51 1-component sealing film produces seamless and jointless sealing under ceramic coverings in damp and wet areas inside (e.g. in private bathrooms, toilets, kitchens). In the case of floor constructions with insulating layers CL 51 is applied directly onto the load-distribution layer (screed). Also suitable for use on heated screeds. approximate consumption (two layers): approx. 1.1 kg / m² waterproof and flexible covering scratches it does not contain solvents fixing tiles after 4 hours Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CL 152  Ceresit CL 152 is used for reinforcing flexible watertight layers Ceresit CL 50, CL 51, CR 166 and for seal coating Ceresit CR 90 at the places of connection with horizontal edges, expansion gaps etc. It ensures watertight layers for ceramic tiles. It may be applied on the walls and floors inside and outside the buildings. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanised sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialised equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. replaces traditional glues and cement mortars ready to use does not require the use of electrical equipment, water or specialized equipment highly efficient (up

Ceresit CT 17  Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate) it strengthens the surface reduces the absorbability of the substrate improves adhesion to the ground permeable makes it easier to apply subsequent layers, eg glues, putties, floors, paints Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 49 White Ceresit CM 49 is used for the high-strength, void-free installation of ceramic tiles and slabs, both indoors and outdoors, using the thin-, medium- or thick-bed method (20mm). CM 49 Multi Xpress sets rapidly.   It can also be used for bonding large-tiles and slabs, and discoloration-proof installation of non-translucent natural stones. Special mega flexible white tile adhesive for demanding substrates For large tiles and plates more than 120cm side length Resistant to climate stresses on balconies, terraces and heated floors (S2 class) On young/green screet Can be used for Natural stone and marble Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk  

Ceresit CT 17 Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate) it strengthens the surface reduces the absorbability of the substrate improves adhesion to the ground permeable makes it easier to apply subsequent layers, eg glues, putties, floors, paints Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 49 ​​ Ceresit CM 49 is used for the high-strength, void-free installation of ceramic tiles and slabs, both indoors and outdoors, using the thin-, medium- or thick-bed method (20mm).   It can also be used for bonding large-tiles and slabs, and discoloration-proof installation of non-translucent natural stones Special mega flexible white tile adhesive for demanding substrates For large tiles and plates more than 120cm side length Resistant to climate stresses on balconies, terraces and heated floors (S2 class) On young/green screet Can be used for Natural stone and marble Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 22 Ceresit CM 22 Mega Format Flexible tile adhesive ensures a highly flexible adhesive bed on critical surfaces. Its consistency is adjustable therefore CM 22 is very well suited for large format tiles – it is perfect for use on heated screeds, balconies, patios, especially on young precast concrete members (at least 3 months old). CM 22 can be taken also to repair and level unevennesses of up to approx. 8 mm depth prior to tile laying. Special tile adhesive for application of mega format plates on difficult substrates For large tiles and plates up to 120cm side length Very easy application Adjustable consistency for wall and floor Very high tolerances and an increased retention of water (6.8 – 8.8 litres of water) Resistant to surface deformation on balconies, terraces and heated floors (S1 class) For indoor and out-door use Thin and middle bed method Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 17 Ceresit CM 17 SUPER FLEXIBLE tile adhesive is designed for laying ceramic, cement and stone tiles (except marble) on deformable substrates. Its characteristics guarantee a flexible connection with the substrate and transmission of squeezing stresses between tiles and the substrate. Therefore, CM 17 SUPER FLEXIBLE is recommended for laying tiles on thin partition walls, heated floors, elevations, terraces, balconies, pool basins and technological water reservoirs. Premium, flexible  tile adhesive  with high adhesive strength for all kind of tiles on difficult substrates Highest adhesion strength and flexibility Safe application even in extreme conditions Resistant to substrate deformations on balconies, terraces and on heated floors High load resistance For critical substrates (e.g. tile-on-tile) For pools and wet areas For large format tiles (> 1m), porcelaine and natural stone For indoor and outdoor use Please speak to one of our friendly staff on 02038839057 Buy you

 Ceresit CM 16 WHITE Ceresit CM 16 WHITE mortar is used for fixing tiles made of marble, granite, sandstone, travertine, conglomerate, light limestone and other coarse-grained rocks resistant to discoloration. It is also suitable for gluing ceramic and porcelain tiles, glaze, terracotta and all types of mosaic, e.g. glass and ceramic. Each time, before fixing the tiles, it is recommended to make your own application test in order to check that the mortar does not discolor the tiles. The properties of the mortar make it possible to fix the tiles on gypsum-fiber boards and gypsum-cardboard boards on substrates such as anhydrite screeds, gypsum and aerated concrete substrates and on sealing coats. It can be used on terraces, balconies, stairs, heated floors, facades as well as on OSB boards and on the existing ceramic cladding (only inside rooms). It also works well in places exposed to intense traffic and utility loads, such as: communication routes, corridors, schools, supermarkets, sh

Ceresit CM 16 PRO The technologically advanced CM 16 PRO mortar has: The only adhesive mortar with 3 technologies – AERO, Micro-Gel, Fiber Force AERO technology: perfectly aerated, plastic consistency MICRO GEL technology: grouting after 12h, application at elevated temperatures Reinforced with Fiber Force fibers – greater grip and flexibility 3in1 – medium layer up to 10mm, leveling, stable in various thicknesses recommended for all types of tiles for small, medium and large format tiles for balconies and terraces the ability to adjust the consistency Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 CM 16 Express CM 16 Express mortar is particularly useful during renovation works and when it is important to put the premises into operation quickly. The mortar allows foot traffic and pointing after just 3 hours from the moment the facing is glued. CM 16 Express is used for fixing ceramic tiles (glaze, terracotta, gres), cement and natural stone (resistant to discoloration) on substrates such as: concrete, cement screed, cement and cement-lime plaster, and heated floors. It works well in places exposed to intense traffic and utility loads, such as: communication routes, corridors, schools, supermarkets, shops, restaurants, etc. It can be used inside and outside buildings, in housing and general construction. Also (only inside buildings) on gypsum, anhydrite, aerated concrete substrates, strong paint coatings, existing tiles, cellular concrete. In the case of fixing tiles made of stone sensitive to discoloration, it is absolutely necessary to carry out own application tests to check

Ceresit CM 16 CM 16 ensures a flexible adhesive bed and balances squeezing stresses on critical substrates – therefore well suited for use on heated screeds, balconies, patios and facades, especially on young precast concrete members (at least 3 months old). Easy to apply on balconies, patios and permanently wet areas (domestic + public) indoor and outdoor For easily deformable and difficult substrates (especially tile-on-tile, OSB) Resistant over underfloor heating Recommended for earthenware, porcelain and natural stone tiles and insulating boards Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk  

 Ceresit CM 12 Plus Ceresit CM 12 Plus adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (discoloration-proof), indoors and outdoors. Ceresit CM 12 mortar can be used in areas exposed to water penetration and on heated floors. As a medium-bed mortar, CM 12 can be applied to repair and level surfaces with depressions of up to 8 mm before laying tiles. Flexible floor adhesive with plastic consistency Excellent working parameters+D1 For wet areas For underfloor heating For heavy traffic areas On non-deforming and sealed substrates For indoor or outdoor For ceramic and gres tiles Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk